- Contact Web Cleaners
- Single-Side, Top-Side Web Cleaner with Pneumatics
- 2-Sided Web Cleaner with Roll Separation Pneumatics
- Two-Sided, Single-Nip or Double-Nip Web Cleaner
- Dual Offset Tape Roll, Wide Web Cleaner
- Nip-to-Nip Traversing Wash Web Cleaner with Oscillation
- Nip-to-Roll Water Wash Web Cleaning
- Extender™ Self-Contained Oscillating Tape System
- Conveyor Cleaner
Nip-to-Nip Traversing Wash Web Cleaner with Oscillation
This web cleaner cleans both sides of a substrate utilizing a contact cleaning roll nip in the vertical span of the web.
Two pairs of Contact Cleaning Rolls (CCR) alternate between a nip mode and a retracted wash mode. During the wash mode, the CCR are cleaned by a robotic cleaning head that traverses across the face of the CCR, wiping and collecting the contamination with a wet cleaning fabric. The CCR are then spun dry before alternating back to the nip mode.
Applications
- All substrates, including recycled paperboard; high speed and all web tensions
Process Parameters
- Maximum speed 2500fpm (762 mpm)
- Minimum width 20” (510 mm)
- Maximum Width 80” (2030 mm)
- Continuous cleaning opera>on
- Consumable cleaning fabric can be replaced without interrupting cleaning
Features
- Two sided, nipped web cleaning
- Water wash CCR cleaning
- Adjustable high pressure CCR wash
- Oscillation for effective slit edge cleaning
- Minimal operator involvement
- Low cost consumables
- Altered designs available
- Operator interface included
- Guarding & Static Elimination
Options
- Infeed and exit idle rolls
- Custom length and speed designs upon request
- Similar Products:
- Two-Sided, Nip-to-Nip Convertible Web Cleaner with Dual-Offset Tape
