Two-Sided, Nip-to-Nip Convertible Web Cleaner with Dual-Offset Tape

This Contact Web Cleaner provides double-­sided, contact web cleaning via an S-­wrap or nip-to-nip method of contact cleaning.

This cleaner is generally recommended for use with thin-to-thicker substrates that require varying web tensions and utilize varying web surface speeds. This web cleaner contains three (3) 7.0" O.D. Polymag® Tek Blue-­S™ Contact Cleaning Rolls (CCR) and three dual-­tape drawer slide assemblies. As the web transports through the cleaner, a CCR provides lay-­on contact with each web surface via an S-­wrap or a nip-to-nip method of contact cleaning, thereby eliminating the loose contamination present on both surfaces. Each engaged CCR surface is continually cleaned on its full length via a pair of overlapping 3" I.D. core, pre-­cut, sheeted, adhesive tape rolls, mounted in a full-­length drawer slide. Each respective drawer slide mount houses a pair of adhesive tape rolls (for a total of four tape rolls in use at one time) and provides end-of-the-machine access for easy expended tape roll changeout and maintenance. The adhesive tape rolls overlap to provide seamless cleaning of the CCR. Ideal for use on substrates 0.0002"- 0.020" thick.


  • 2 sided web cleaning
  • Thin or thick film web cleaning

Process Parameters

  • Maximum speed 800 fpm
  • Minimum width 30”, Maximum 119”
  • Continuous cleaning operation
  • Consumable Adhesive Tape can be replaced without interrupting cleaning


  • ‘Nip-to‐Nip’ or ‘S-­Wrap’ convertible design
  • Drawer slide for adhesive tape removal
  • Quick release tape mounting system
  • On-the‐fly tape changes
  • Operator Interface included
  • Good for any web orientation
  • Altered designs available
  • In-­feed and exit active static elimination


  • In-feed idle rolls
  • Stainless Steel enclosure
  • Polycarbonate slide guards
  • Safety interlock package

CONTACT USDo You Have a Unique Contamination or Quality Issue?

We can help. Please send us a message or give us a call.

Send Us a Message

* required